All recommendations made in the building and pest inspection reports must be addressed well. The building inspection report is a very essential factor as it is a detailed property survey done by building experts.
If you are an owner or builder, and your prospective home is surrounded by an existing building, you should allow and provide for a Dilapidation Report. These reports check and record digitally. Existing damage, before the start of building a home or commercial project. So that your neighbours cannot blame existing damage on your current works.
Call Peter 0418 948 760 – Davide 0424 305 175 for the relevant pricing.
You may be concerned about, what you perceive to be, unsatisfactory workmanship that is currently under construction of your home. That is when you contact our office and arrange for one of our inspectors to assess the workmanship to date. A written report is compiled using digital photos. Also, you can meet our inspector on-site for a verbal interpretation and commentary.
When your maintenance on your home is due, that is when you contact our office. Then arrange for one of our inspectors to assess & verify the maintenance items to be carried out by the builder.
Inspections are carried out with the help of a drone, where areas are physically hard to access.
Thermal Imaging is the visual way of identifying where there is insulation missing, electrical circuitry is overheating and where there a moisture seepage’s where a normal visual inspection would not identify these issues – again we able to arrange this service.
If you are an Owner Builder and need to sell your Owner built home before 7 years is up, then you will require by law, to provide your purchaser with a Home Indemnity certificate. To obtain this you will need to approach a reputable broker, who in turn will require you to produce a Home Indemnity report.
With the new legislation in place to have the most energy efficiency in a home. We can arrange an energy report letting you know exactly where energy is wasted (leaking)
If a report has identified items to be repaired, how can you be sure that they have been correctly repaired? Well, we can re-inspect or re-certify the job in question.